Call us to get tree assist just as tree cleanup, tree grinding, bush hauling, shrub clear, stump cutter and a lot of other around USA.


Call us now

Call us now +1 (855) 280-15-30






With 41 steps and 78 photos, all bushing and.

May 15, Now remove the cap screws, lock washers, and collars from both ends of the control arm shaft. Step Install a 3/×2¼” cap screw in one end of the shaft. Place the control arm in a press and support one bushing end of the control arm shaft with a 1 11/16” socket.

Follow along as we remove the OEM bushings on a Corvette and replace them with urethane versions.

Now press out the bushing into the treeclear.buzzted Reading Time: 7 mins. Replace C4 Rear Bushings & Universal Joints. About Chapter 8. In this detailed chapter, I show you the easy and correct ways to remove and install all rear suspension bushings, and axle shaft u-joints on the C4 Corvette. These too-often overlooked parts are critical to driving safety and suspension longevity – not to mention even, long tire wear. Corvette Bushings and Control Arm Shaft Installation.

Before painting, I installed the bushings in the top and bottom A-arms. To make the installation easier, I put the bushings in the freezer for 24 hours so that the rubber would contract. The taller bushings are for the lower control arm and the shorter ones are for the upper control arms. Jan 04, Four trailing arms, or spindle control rods, hold the rear axle in place. On the earlier Corvettes a single trailing arm was used.

From to an arm was attached to the frame and ran towards the rear of the car. This trailing arm held the rear spindle in place. The C4 design is really just an improvement on that earlier treeclear.buzzted Reading Time: 6 mins.

I also like the sort of job where I can take my Corvette apart on Saturday morning and have it back on the road by Saturday afternoon.

Oct 15, C4-C6 Corvette Control Arm Urethane Bushing Installation Overview. Over time, the original rubber control arm bushings on C4-C6 Corvettes will wear out and fail. While some owners will want to stick with new rubber bushings as a replacement option, there is another option that has become almost second nature in recent years: urethane treeclear.buzzted Reading Time: 3 mins.