Results page 2.
Find Beverly,MA Torque Converter Repair shops for your repair needs. Review Beverly repair shops that specialize in Torque Converter Repair. Torque Converter Bushings CCTY Bearing. High performance torque converter bushings for transmissions are available in custom sizing and designed specifically to minimize friction and wear for rotational and linear motion.
Bushings for transmission Torque Converter, Torque converter bushing, split bushing for torque converter, High performance. Jun 06, Installation of the torque converter is not always as easy as it looks. We have found that over time that as much as 85% of the clearance.
Check to make sure that the bolt holes or studs on the converter line up with the bolt pattern of the flywheel.
front pump bushing, and converter neck. 4. Install converter into the transmission. Converter hub to bellhousing bushing clearance should be"" Converter depth from the front of the pad to front of the bellhousing should be 1 5/8" to 1 3/4" If you have repeated front seal blowouts on A4LD's it may not be a problem with the seal or the quality of your work.
After removing the torque converter from the box check that it is the correct application. Hold the torque converter onto the flywheel checking that the pilot fits properly into the rear of the crankshaft with no excess clearance.
Make sure that the bolt holes or studs on the torque converter line up with the bolt pattern of the flywheel. STEP # 2.